Showing posts with label bearings. Show all posts
Showing posts with label bearings. Show all posts
Thursday, 11 November 2010
Using an ultrasonic cleaner to clean bearings?
Londonskaters.com seem to thing it's a good idea...
http://www.londonskaters.com/review-ultrasonic-cleaner-cleaning-skate-bearings.htm
but if you have to do it the old fashioned way, then they also have a guide...
http://www.londonskaters.com/article-speed-skate-bearing-cleaning.htm
But then maplin are doing some cleaners for £25, might be worth a punt?
http://www.maplin.co.uk/Module.aspx?ModuleNo=223108
hmmm.....
Friday, 18 December 2009
Bearings - To clean or to buy new??
Bearings. Full set of 8 is £10 including p&p from ATBSports. So, if we're going to bother cleaning our bearings we have to do it for less than £10 for it to be worthwhile.
To clarify this, I mean that if I'm going to clean my bearings then I should be able to buy my cleaning fluid, grease and buy my own free time (currently set at approximately £10 per hour), for under £10.
To further clarify this last point, I like to set a cost for my free time in order to judge which jobs are worth doing and which jobs can be outsourced, especially those jobs that I am not especially fussed about. An example of this could be changing the oil in my car. Whilst I am perfectly capable of changing the oil myself, I estimate that this activity would take me approximatley 2 hours of my time from finding the right tools, doing the job through to getting cleaned up and moving on to something else. This in terms of my free time budget comes to £20 (plus cost of oil). Therefore, if a garage can change the oil for me for under £20 (plus cost of oil), then I'll get them to do the works for me.
Going back to the issue of bearings, if we say that the cleaning fluid and grease can be bought for £5 total, then I need to complete the cleaning in under half an hour in order to keep to the £10 limit set above. Any longer and I may as well buy new.
Can I dismantle, clean and reassemble within £10? Going to buy some bits tomorrow and will attempt this over the weekend. Updates as we go.....
Friday 18th Dec:
Visited Derby Bearings Ltd for a quote for new bearings and got told approximately £3-£3.50 per bearing. Since I can buy them off the internet for £1.25, if I do buy new I'll do just that. Bought 400g tube of grease for £1.60 (smallest size available). This should be enough grease to last me forever!
Realised late last night that to replace all my bearings with new wouldn't be just one set for £10 but rather three sets for £30: 8 x wheel bearings for the noSno and 8 x wheels bearings + 4 x kingpin bearings for MBS board. Blimey, perhaps it is worth me doing them all in one shot! (Or more realistic, I'll clean the spare ones I have and then replace as necessary).... Next job, find suitable cleaning fluid!
Saturday 19th Dec:
House stinks of white spirit. Bearings seems lovely and clean though I had to prise both sides of to get at all the muck. Some bearings seem to be in much better condition that others so I'm going to have to come up with a strategy. I'm thinking taking the bearings off one of the boards, cleaning them up too then pickling the best ones to go back on. The worst case ones don't seem to spin well however much I slosh them around. Next job, re-greasing.
To clarify this, I mean that if I'm going to clean my bearings then I should be able to buy my cleaning fluid, grease and buy my own free time (currently set at approximately £10 per hour), for under £10.
To further clarify this last point, I like to set a cost for my free time in order to judge which jobs are worth doing and which jobs can be outsourced, especially those jobs that I am not especially fussed about. An example of this could be changing the oil in my car. Whilst I am perfectly capable of changing the oil myself, I estimate that this activity would take me approximatley 2 hours of my time from finding the right tools, doing the job through to getting cleaned up and moving on to something else. This in terms of my free time budget comes to £20 (plus cost of oil). Therefore, if a garage can change the oil for me for under £20 (plus cost of oil), then I'll get them to do the works for me.
Going back to the issue of bearings, if we say that the cleaning fluid and grease can be bought for £5 total, then I need to complete the cleaning in under half an hour in order to keep to the £10 limit set above. Any longer and I may as well buy new.
Can I dismantle, clean and reassemble within £10? Going to buy some bits tomorrow and will attempt this over the weekend. Updates as we go.....
Friday 18th Dec:
Visited Derby Bearings Ltd for a quote for new bearings and got told approximately £3-£3.50 per bearing. Since I can buy them off the internet for £1.25, if I do buy new I'll do just that. Bought 400g tube of grease for £1.60 (smallest size available). This should be enough grease to last me forever!
Realised late last night that to replace all my bearings with new wouldn't be just one set for £10 but rather three sets for £30: 8 x wheel bearings for the noSno and 8 x wheels bearings + 4 x kingpin bearings for MBS board. Blimey, perhaps it is worth me doing them all in one shot! (Or more realistic, I'll clean the spare ones I have and then replace as necessary).... Next job, find suitable cleaning fluid!
Saturday 19th Dec:
House stinks of white spirit. Bearings seems lovely and clean though I had to prise both sides of to get at all the muck. Some bearings seem to be in much better condition that others so I'm going to have to come up with a strategy. I'm thinking taking the bearings off one of the boards, cleaning them up too then pickling the best ones to go back on. The worst case ones don't seem to spin well however much I slosh them around. Next job, re-greasing.
Monday, 16 November 2009
How to make a mountain board go faster? Better Bearings?
Was reading through random google links over the weekend when I came across some fella on yahoo questions asking about which bearings were the best as he wanted to go faster. Fair enough!
Bearings, a particular talking point in the skating community usually comes down so some bloke with anecdotal data who swears his mega bucks bearings are fantastic, verses those who advise to save their money on good old reliable cheap (but not mega cheap) equivalents.
A lot of the myths and confusions does seem to revolve around bearing standards and Lush Longboards (whos longboards are non coincidently lush!) do a great job of explaining things here.
If we want to transcribe the data above to mountain boarding, then its probably safe to say that we do not speed as fast as downhill longboards, our wheels have larger diameters than downhill longboarders; therefore it should be safe to say that our bearings rotate slower than downhill longboarders. In this case, the advice above given by Lush about not seeing the benefit of fitting expensive bearings should equally apply to us.
Good bearings can be bought straight from ATBSports from here, £10 for 8. I've looked previously online for equivalent bearings straight from the manufacturer, best I could do was £2.50 each plus p&p.
So, going back to the original question about making a mountain board go faster, I can think of the following: (feel free to add your own!)
Ps the resolved Y! answer was 'Kite buggy bearings'....
Pps, need more pictures, I can never be arsed to add pictures : (
Bearings, a particular talking point in the skating community usually comes down so some bloke with anecdotal data who swears his mega bucks bearings are fantastic, verses those who advise to save their money on good old reliable cheap (but not mega cheap) equivalents.
A lot of the myths and confusions does seem to revolve around bearing standards and Lush Longboards (whos longboards are non coincidently lush!) do a great job of explaining things here.
If we want to transcribe the data above to mountain boarding, then its probably safe to say that we do not speed as fast as downhill longboards, our wheels have larger diameters than downhill longboarders; therefore it should be safe to say that our bearings rotate slower than downhill longboarders. In this case, the advice above given by Lush about not seeing the benefit of fitting expensive bearings should equally apply to us.
Good bearings can be bought straight from ATBSports from here, £10 for 8. I've looked previously online for equivalent bearings straight from the manufacturer, best I could do was £2.50 each plus p&p.
So, going back to the original question about making a mountain board go faster, I can think of the following: (feel free to add your own!)
- Pump up tires - more pump = more umph!
- Steeper slope - let gravity do its magic!
- Smoother slope - tarmacs quicker than deep grass!
- Dryer slope - don't get stuck in the mud!
- Wear Lycra - you perv!
- Fit larger tires - 9 or 10 inch or even larger
- Make sure your axle nuts aren't too tight - hand tighten and then release by quarter or half a turn or so.
Ps the resolved Y! answer was 'Kite buggy bearings'....
Pps, need more pictures, I can never be arsed to add pictures : (
Subscribe to:
Posts (Atom)
